SKU: 312102

In this toolset are 1/4″, 3/8″ and 1/2″ SAE sockets that range from 3/8″ all the way up to 1-1/4″. This set also includes shallow and deep-well sockets and crows feet. Sonic Sockets are made from Chrome Vanadium steel while socket bits are made hardened tool steel. Also included in this 121-piece set are SAE Hex bits from 3/16″ to 5/8″, and you get a 10-piece Hex-key set that includes sizes from 1/16″ to 3/8″.

SKU: 604010

Complete your tool set with this Sonic 40-piece SAE wrench set. Sonic wrenches are made from Chrome-Vanadium steel for durability with excellent resistance to the elements and chemicals. This kit includes standard combination wrenches from 1/4″ to 15/16″ and double open-end wrenches from 1/4″ to 1-1/4″. Also included are Flare Nut wrenches in 1/4″ to 11/16″, 45-degree Offset Ring wrenches from 1/4″ to 1″, and ratcheting wrenches from 3/8″ to 3/4″.

SKU: 306403

This socket set is for all those tough to loosen bolts. Sonic’s Impact Sockets are made from CR440 steel, offering excellent impact-resistance while still combatting the elements with its stainless properties. Included in this Medium toolset are 3/8 and 1/2″ 6pt. SAE impact sockets in shallow and deep.

SKU: 601806

Our Ball Grip tools offer a combination of a T-handle and L-handled tool. You get the long-reach of the T-handle and the short L-handle for more torque to fasteners. Elliptical shaped ergonomic handles are made from chemical resistant plastic with a rubber overmold and highlighted with the embedded Sonic logo. This 18-piece set includes Torx (T8-T45) and Hex Key (2.5mm-10mm) Ball Grip tools.

SKU: 601807

Sharing handles from the Sonic Screwdrivers, the Sonic Nut Drivers include ergonomic tri-lobe plastic handles with a rubber overmold for comfort and grip. Chrome Vanadium shafts ensure durability for years of use. Nut drivers in this 18-piece set run from 6mm to 13mm, and you also get the 6, 7, and 8mm Flexible Shaft Nut Drivers.

SKU: 603402

With this kit, your opportunities, profitabilities, and efficiency will grow. This Sonic 34-piece set if full of specialty tools. Clamp off vacuum and fuel lines safely with the included plastic clamping jaws in 3 different sizes. A crimping tools with multiple exchangeable crimping jaws makes any automotive electrical job much more feasible. A set of automatic wire strippers removes insulation without effort or thinking. Multiple pliers, snap-ring pliers, adjustable pliers, and even locking pliers will make many jobs much easier. Also included in the kit is an electronic brake fluid tester, a flexible magnet, and even left and right metal snips.

SKU: 314901

This is the ultimate 1/2″ socket and ratchet set. First off, this Sonic 149-piece kit includes a 60-300 ft-lbs (80-400NM) 1/2″ Torque Wrench. Don’t mistake this with the smaller 150 ft-lbs tool. This gift keeps on giving with three 1/2″ ratchets in Quick Release, flex-head, and swivel-head designs. Also included are two 1/2″ breaker-bars. Multiple extensions, universal-joint, and adapters extend the possibilities of this set. In addition to the plethora of shallow and deep-well sockets, this set also has a slew of specialty bits like Torx, Spline, Hex, and E-torx, just to name a few. Finally, 4 different wheel sockets include a synthetic sleeve for protecting expensive wheels.

SKU: 221801

Have you ever wondered what they perfect tool drawer would look like, you may be looking at it. This Sonic 218-piece tool set carries a vast array of sockets, bits, ratchets, and accessories to cover a multitude of jobs.

SKU: 607201

Wrenches, wrenches, and more wrenches in this 72-piece Sonic wrench set. From stubbies to ratcheting and flare, this set has you covered. Twelve reversible ratcheting wrenches cover sizes from 8mm to 19mm and the reversing lever allows you to change directions without taking the wrench off the fastener. You also get E-torx ratcheting wrenches from E6 to E24, along with regular E-torx double-end wrenches. Sonic Tools wrenches are made from tough Chrome-Vanadium steel for durability and resistance to the elements and chemicals.

SKU: 303902

Sonic Tools Impact Sockets are made from CR440 steel, offering excellent impact-resistance while still combatting the elements with its stainless properties. This whole set is meant for your 1/2″ impact wrench and 1/2″ ratchet. These 1/2″ deep-well impact-rated sockets cover everything from 10mm all the way to 38mm. There’s even Sonic Wheel Sockets with a protective sheath in 15, 17, 19, 21, and 22mm. For those tough-to-loosen fasteners, this 39-piece set has Hex-key bits in 14, 17, and 19mm. Rounding out this are the 3-inch, 5-inch, and 10-inch 1/2″ drive extensions.

SKU: 306402

This 64-piece 1/2″ Socket Bit set is one those that are a must for your toolbox. These bits include the standard Hex and Torx bits and special bits like TamperProof Torx, Ribe Bits, Splines, and even Alternator Bit Sockets in M10x110L and T50x110L. The body of the sockets are made with Chrome Vanadium polished to a satin finish, while the bits are hardened tool steel to hold up to the stress.

SKU: 604501

Get all your drivers, including extra-long Torx drivers in this Sonic 45-piece tray. Sonic Screwdrivers include ergonomic tri-lobe plastic handles with a rubber overmold for comfort and grip. Chrome Vanadium shafts ensure durability for years of use, and a hardened magnetic tip offers maximum gripping power. In addition to the multitude of screwdrivers are the scrapers, door clip tools, hooks, and various other pry tools with the same driver handles. Seven extra-long Torx drivers are included from T15 up to T45.

SKU: 116901

Get all your 1/4″ Ratchet and Socket needs in this 169-piece set. Sonic Ratchets are made from Chrome Vanadium steel polished to a satin finish, while the handles have a comfortable and ergonomic round rubber handle. Sockets are also made from Chrome Vanadium and bits are made from hardened tool steel. The set includes Ratchets and Sockets with 1/4″ drive size as well a 1/4″ torque wrench.

SKU: 602007

Our Sonic Hammer and Chisel set includes quality materials to get the hard work done. The hammers include Italian made hickory handles with natural shock absorbing action. Machined faces offer precision dead-blow striking action. Two synthetic headed hammers provide sufficient force without marring softer surfaces such as aluminum. Chisels and punches are made from precision tool steel and CNC machined for accuracy. Foam rubber handles are chemical resistant and a synthetic cap-ring protects your hand from any misaligned strikes. Various sizes and shapes ensure you have the right chisel for the job.

SKU: 601808

Sonic Screwdrivers include ergonomic tri-lobe plastic handles with a rubber overmold for comfort and grip. Chrome Vanadium shafts ensure duarability for years of use, and a hardened tip offers maximum gripping power. You get a Phillips 1 and 2 as well as Slotted 5.5, 6.5, and 8mm. Additionally, this set includes extra-long 18-inch #2 Phillips and 6.5mm Slotted screwdrivers. Also, 8″ and 12″ prybars are included, as well as assorted hooks and picks.

SKU: 604402

There’s several tools in here that will save your day, or even your week. While files and a hacksaw may seem routine, having it within reach is the real luxury. A 9-inch vernier caliper and a tire-tread depth-gauge deliver real measurements for informed decisions. Adjust valves are no problem with the 26-piece feeler gauge and a stainless-steel protractor will help you determine the right angle. Sonic rounds out this 44-piece set with a 5-meter measuring tape.

SKU: 605001

The Sonic Tools 50-piece wrench set offers a ton of flexibility with seven different types of wrench sets in this one kit. Double ended Flare Nut wrenches include one stationary end and one flexible end in sizes from 8mm to 12mm. Hinged Socket and Hinged E-Torx wrenches offer the benefits of a socket with a different size on each end. Extra long combination wrenches offer an open-end and a box-end for access to just about any fastener. Finishing the kit is a set of Double Box-end wrenches, a 9-piece Torx-key set, and a 10-pc Hex-key set. All Sonic Tools wrenches are made from Chrome-Vanadium steel that offers a lifetime of durability and resistance to weather and chemicals