Skip Navigation

S15 Toolbox, 14 Drawers

SKU: 47338114

Product Overview:

$5,618.00 $4,213.00


  • Shipping: Toolboxes too big/heavy to ship via UPS will ship through a Freight Carrier for a flat rate.Learn more.
  • Warranty:

The Sonic S15 toolbox is a newly designed toolbox featuring a stainless steel work top, two integrated can holders, and a paper towel holder. The angles of the toolbox have a strengthened profile, resulting in more firmness and stability for a longer life cycle.


S15 Toolbox

Step up to the best with this Sonic Tools S15 Toolbox. This is the biggest box we make and it includes a stainless steel top for a nearly impermeable work surface. Sonic toolboxes are stamped from a single sheet of steel then folded and welded creating a much stronger bond than independant pieces. Four large 5-inch rubber casters bear the weight of the box and contents while still rolling easily across the shop floor. You get one broad drawer that spans the whole length of the box at the top, then twelve more drawers span roughly half the box for remainder of the storage. Along the back and both sides, you get can holders and trays, and even a paper towel holder. The Sonic anti-tilt feature only allows one drawer to be opened at a time, so most of the weight remains centered over the four casters. The Sonic s15 toolbox is powder-coated in Black, and they are covered by a lifetime warranty.

The S15 toolbox ships on a pallet with plenty of packing around it to protect the edges. The 5-inch casters (two swiveling/locking) also come pre-installed. In less than 10 minutes you can have the shrink-wrap off your toolbox and you are ready to go.
7 shallow XD, 5 shallow medium, 1 extra deep, and 1 deep and wide drawer

The drawers slide open easily-even when filled with heavy tools. There is a positive click when the drawers close, and the ball-bearing slides make for a smooth, confident open and shut. All drawers are 100% retractable and the included keys lock and unlock all drawers for security.

Shallow extra deep drawers = 29.5 x 22.5 x 2.5"

Shallow medium drawers = 22.5 x 22.5 x 2.5"

Deep drawer = 22.5 x 22.5 x 6.1"

Deep full width drawer = 56.5 x 22.5 x 7.7"

Total storage = 30,820.5 cubic inches

Safety drawer release system

This feature allows only one drawer on each side to be open at once protecting again tipping over.  

Torsion resistant through profile construction at the 4 corners

All Sonic toolboxes are wrapped in one piece of steel. This feature maximizes strength and rigidity of the toolbox while also using less material, welds, and connection points. The S15 toolbox is manufactured with high precision to ensure quality, firmness, and stability for a longer life cycle.

Stainless steel work top

The S15 comes with a stainless steel work top

Added exterior storage

The S15 toolbox comes with attachable can holders, trashcan, and document holder. 

Powder coating

The black (RAL 9004) powered coated finish on the S15 toolbox adds a durable, tough, and stylish exterior to your toolbox.

4 rubber casters 2x swivel casters with brake and 2x fixed
The two 5-inch swivel casters lock and unlock very easily by toe, and the entire box moves easily around the shop’s concrete floor as needed.

Toolbox Features

Drawer Construction

Drawer Construction

All drawers are built from 1 piece of steel with structural ribs added for rigidity. Each drawer is affixed with ball bearing slides and are fully extendable exposing 100% of the drawer's content.

Anti-tilt drawers


Featuring an Anti-tilt mechanism to allow for only 1 drawer to be open at any given time, reducing the possibility of unbalanced weight and tipping. When one drawer is open, all other drawers are locked.

Quality construction

Fit, Finish and Construction

All Sonic toolboxes feature a one-piece steel construction. This maximizes strength and rigidity.

Specs & downloads


  • Medium Drawers: 6
  • Extra Deep Drawers: 7
  • Weight: 529lbs
  • Height: 46"
  • Width: 67"
  • Depth: 28"


1 review

Write a Review

S15 Toolbox, 14 Drawers
S15 Toolbox, 14 Drawers